VAINO INTERNATIONAL LIMITED
5 1

Hydraulic Extrusion Blow Molding Machine 10L Chemical Tank With Automatic Deflashing

Contact Now* Send an Inquiry to this supplier.
or
Start Order * Name your price

Contact us

VAINO INTERNATIONAL LIMITED
[China]

Address
Room 702-3,Ningbo Lishi Commercial building,Lane 578,45# Tiantong South Road,Yinzhou District,Ningbo,China Ningbo Zhejiang
Phone
86-0574-88054805
Contact name
Tina

Quick Information

  • Brand Name: MEPER
  • Place of Origin: China
  • Model Number : MP80D

Description

 

Hydraulic Extrusion Blow Molding Machine 10L chemical tank  with automatic deflashing

 

 

Brief introduction

Hydraulic system design extusion blow molding machine MP80 is suitable for Producing Medium Size Bottles up to 10L of Various Materials, and Equipped with Single Die Head, Double Die Heads, Three Die Heads,  Four Die Heads,Six Die heads.

Adopt four leaders point support structure, it can accept heavy moulds. With parison control system ,it is especially to make bottles below 10 liter ,like toys, auto parts ....

 

Advantage:

 

1. most important for a good EBM machine is the action system and the extrusion system.

   we'r using powerful hydraulic system design with imported valve and pump for stable action

   Adopt China famous brand Gearbox along with Delta extrusion motor ,make sure machine runs   continiously,long life.

 

2. Heavy and stong structure,make sure machine works more faster and stable.

 

3. Special protection for the machine and people

    Sensor in the operating door: if anybody enter the machine,the electricity conneced with the machine will automatic cut down.

   Temperature interlock system:When the material inside the barrel is not reaching the setting temperature,the extrusion motor can never start.that will help the screw and head of the machine.

 

4. Special care for different countries.

    we offer some special design for different countries,in order to matching best performance.

 

5. Easy die head dis-assemble and assemble

 

6. Defleshing function included

 

Center distance introduction:

 

Double head standard Center distance:180mm (160-200mm optional)

Thriple head standard center distance:120mm(100,,125,130mm option)

Four head standard center distance:100mm(90mm as option)

Six head standard center distance:70mm

 

Machine specification:

MP80D
Material PE,PP,(PVC,PA)OPTION
Max container capacity L 10
Number of die set 1,2,3,4,6,8
machine Dimension(L×W×H) M 3.82×2.54×2.5
Total  weight ton 4.5
Clamping force kn 120
Platen opening stroks mm 220-620
Stroke of mould board mm 400
Platen size mm 420×520
Max mould size(W×H) mm 480×500
Mould thinkness mm 225-300
Screw diameter mm 80
Screw L/D ratio L/D 24
Plasticising capacity kg/h 85
Number of heating zone zone 4
Extruder heating power kw 18.5
Power of screw-bar machine kw 0.22
Extruder driving power kw 30
Number of heating zone zone 2
Power of die heating kw 13.5
Max die-pin diameter mm 180
General power of machine  kw 73.7
Power of the electric motor of oil pump kw 9.5
Air pressure Mpa 0.6-0.8
Average energy consumption kw 35
Using quantity of compression air m3/min 1.5-2.5
Using quantity of cooling water m3/min

3.0-5.0

 

Machine parts photo:

This 4 die head blow pin tip,for long narrow neck design bottle.with chiller water tip cooling system

Electric drive hot cutter install on side of the machine for open the parison,best for container with off-center neck


Product Image

  • Hydraulic Extrusion Blow Molding Machine 10L Chemical Tank With Automatic Deflashing image

Related products from premium suppliers on EC21

Send an Inquiry to this supplier

Send an Inquiry to this supplier
* From
  To Tina
VAINO INTERNATIONAL LIMITED
* Buying Product
- Please enter your specific buying item.
e.g. 42 inch LCD TV, leather executive chair
Category : Other Textile Machinery
* Message

Use English only Max. 2000 characters. (Min. 20)

Send
EC21.com does not guarantee the validity of product information or the credentials of sellers.